Install Mastercam x9 Windows 10 Partition On Mac

At least MasterCam is Windows-only. But it doesn’t mean your Mac won’t be able to use it. Windows can be run on a Boot Camp partition that has been installed, or it can be run in a virtual machine with a program like Parallels. Not sure about Creo; however, you may Google it to see if a Mac version exists.

This post will show you how to install Mastercam X9 on a Windows 10 partition on a Mac and if you also wish to install the Windows 10 operating system there.

How to Install Mastercam x9 Windows 10 Partition On Mac

 

Method 1

1. Launch Mac first, then launch the Mac App Store.
2. Enter “Partition Master” in the search bar.
3. Tap the New button on the toolbar and select Create A New Partition.
4. Please choose Macintosh HD Type Partition before tapping the Create button.
5. Select Windows after clicking the Next button.
6. Choose Windows 10 (64-bit) as your operating system
7. Choose Created Partition from the menu.
8. Select Windows 7 by tapping the Boot Tab option (32-bit).
9. Change the file to an ISO image and press the OK button.
10. Load the disc into your computer.
11. Now, let’s enjoy your Mac window!

You can watch the video below for the visual presentation.

Method 2

You can use the link below to download Mastercam X9 for Windows. Then follow these steps to install it on your Mac:

1. Download the Windows version of Mastercam here: [LINK]
2. Partition your hard drive so that there’s enough space for both OSes (we recommend at least 20 GB).
3. Boot into your Mac’s Recovery Mode by holding down Command + R while it’s starting up.
4. Once in Recovery Mode, select Utilities > Disk Utility from the menu bar at the top of the screen.
5. Select your main hard drive from the list on the left side of the window and then click on Partition on the right side of the window under Actions (it will be grayed out if you don’t have enough space).
6. In the Name field, type MS_PARTITION; then make sure that Format is set to MS-DOS (FAT) and size is set to 20 Gigabytes (GB). Click Apply, then Close once done.
7. Download this file and extract it onto your desktop
8. Open Terminal by going to Applications > Utilities > Terminal or searching for it with Spotlight search (Command + Space)
9. Run this command in Terminal: sudo /Applications/Install_Mastercam_X9_on_Mac_(MS_PARTITION).sh
10. Enter your administrator password when prompted and click Continue when finished
11. And that’s it! Now you can open Mastercam X9 from Applications like any other app!

 You can also take your time to see How you can Use PS4 Controller On Overcooked 2 PC with this 4 methods.

Install Windows 10 on your Mac with Boot Camp Assistant

With Boot Camp, you can install Microsoft Windows 10 on your Mac, then switch between macOS and Windows when restarting your Mac.

What you need to install Windows 10 on Mac

Requirement: Boot Camp requires a Mac with an Intel processor. Find the list below:

• The MacBook introduced in 2015 or later
• MacBook Air introduced in 2012 or later
• MacBook Pro introduced in 2012 or later
• Mac mini introduced in 2012 or later
• iMac introduced in 2012 or later1
• iMac Pro (all models)
• Mac Pro introduced in 2013 or later

The latest macOS updates, which can include updates to Boot Camp Assistant. You will use Boot Camp Assistant to install Windows 10.

64GB or more free storage space on your Mac startup disk:

• Your Mac can have as little as 64GB of free storage space, but at least 128GB of free storage space provides the best experience. Automatic Windows updates require that much space or more.
• If you have an iMac Pro or Mac Pro with 128GB of memory (RAM) or more, your startup disk needs at least as much free storage space as your Mac has memory.2

An external USB flash drive with a storage capacity of 16GB or more, unless you’re using a Mac that doesn’t need a flash drive to install Windows.

A 64-bit version of Windows 10 Home or Windows 10 Pro on a disk image (ISO) or other installation media. If installing Windows on your Mac for the first time, this must be a full version of Windows, not an upgrade.

• If your copy of Windows came on a USB flash drive, or you have a Windows product key and no installation disc, download a Windows 10 disk image from Microsoft.
• If your copy of Windows came on a DVD, you might need to create a disk image of that DVD.

How to install Windows 10 on Mac

To install Windows, use Boot Camp Assistant, which is included with your Mac.

Check your Secure Boot setting.

Learn how to check your Secure Boot setting. The default Secure Boot setting is Full Security. If you changed it to No Security, change it back to Full Security before installing Windows. After installing Windows, you can use any Secure Boot setting without affecting your ability to start from Windows.

1. Use Boot Camp Assistant to create a Windows partition.

Open Boot Camp Assistant, which is in the utility folder of your Applications folder. Follow the onscreen instructions.

• If you’re asked to insert a USB drive, plug your USB flash drive into your Mac. Boot Camp Assistant will use it to create a bootable USB drive for Windows installation.
• When Boot Camp Assistant asks you to set the Windows partition size, remember the minimum storage-space requirements in the previous section. Set a partition size that meets your needs because you can’t change its size later.

Format the Windows (BOOTCAMP) partition

When Boot Camp Assistant finishes, your Mac restarts to the Windows installer. If the installer asks where to install Windows, select the BOOTCAMP partition and click Format. In most cases, the installer selects and formats the BOOTCAMP partition automatically.

Install Windows

Unplug any external devices that aren’t necessary during installation. Then click Next and follow the onscreen instructions to begin installing Windows.

Use the Boot Camp installer in Windows.

After Windows installation completes, your Mac starts up in Windows and opens a” Welcome to the Boot Camp installer” window. Follow the onscreen instructions to install Boot Camp and Windows support software (drivers). You will be asked to restart when done.

• If the Boot Camp installer never opens, open the Boot Camp installer manually and use it to complete the Boot Camp installation.
• If you have an external display connected to a Thunderbolt 3 port on your Mac, the display will be blank (black, gray, or blue) for up to 2 minutes during installation.

 

How to switch between Windows and macOS

Restart, then press and hold the Option (or Alt) ⌥ key during startup to switch between Windows and macOS.

 

Summary

To Install Mastercam x9 Windows 10 Partition On Mac, you have to go to the official website of Mastercam. After that there, you have to search for Mastercam x9, and after that, download that software from there you will have to download in some time. It will depend on your internet speed; the faster your internet is, the sooner your software will be downloaded; after downloading, you have to install it simply; I will tell you the installation process.

After the software is downloaded, you have to right-click on it and open it; after that, you will have to tap on the OK button, and your installation process will start; it will take some time too on your laptop. Depending on the above

Once your master cam is installed, then after that you have to open it; after opening you will see many options; ignoring them, you have to click on create a new partition; if you do not see it, then You will have to click on Create a new partition for Windows.

After that, you have to click on the button of the File menu option, click on that menu, and after that, you have to click on Create New Partition there.

After the new partition window comes, you will be shown the size there; after that, you have to click on the Partition created