How To Setup Local Network On Ha Tunnel Plus

How To Setup Local Network On Ha Tunnel Plus

How To Setup Local Network On Ha Tunnel Plus
Ha Tunnel Plus

There are numerous methods to use and setup Ha Tunnel Plus to access the internet if you have a new computer via local network. A free trial, eLearning package, or social media pack are all options. You can begin tweaking the settings once you’ve chosen the plan that best suits your needs. In addition to other configuration options, Ha Tunnel Plus allows you to set up a VPN tunnel pair for your local network.

Thanks to the Ha Tunnel Plus VPN, Internet access with unlimited bandwidth is available for free. However, if you do not know how to create Ha Tunnel Plus files or prepare Ha Tunnel Plus configuration settings, your Ha Tunnel Plus VPN app will be useless.

How to Get Free Internet in Ha Tunnel Plus VPN?

For the Ha Tunnel Plus VPN, there are numerous configuration options for the VPN tunnel app. Your network is called—MTN, Airtel, Safaricom, Telkom, Ooredoo, CellC, Vodacom, Glo, Jio, Digicel, Mytel, Telenor—it doesn’t matter.

To gain free Internet access, all that is required is a basic knowledge of your network (though they are some networks that need more time because they are not easy even to understand)

You will also need functioning hosts for free Internet access in this post. These hosts may take the form of a CDN host, an SNI host, or a packet host. A working host is essential in this case because 92 percent of free Internet exploits rely on hosts to allow them to get past your ISP’s firewall.

Creating a working ha tunnel file

Requirements to create or Set Up a Ha Tunnel Plus hat file

  • Download the latest version of the Ha Tunnel Plus VPN app.
  • Any SIM card of your choice with zero data and airtime.
  • A working host/SNI or the one that you want to test.

Downloading the latest Ha Tunnel plus config file is the easiest way to create a working ha tunnel file. To incorporate the latest updates, these files are often updated. There may be two or more ha tunnel files that you need to download, depending on the nation you’re in and your network. It’s crucial to read the instructions carefully and test the connection first because they each have distinct usage limitations. You can attempt to install the file on your computer after downloading it.

A working ha tunnel file can also be generated from a smartphone. The file can be exported to a folder of your choosing, after which you can import it into an active Ha tunnel. You can browse without charge when the file has been imported into your smartphone. If you can’t connect, your network configuration may be off. Download the latest release of the Ha tunnel and export it to the proper place to fix the issue.

After downloading the most recent version, you can start using the HA Tunnel to access the internet. Use the link below to download the free app to get started. A working host is also required. It works great with a lot of zero-rated websites and SNI bug hosts. You can use the guidelines provided in the help area of the HA Tunnel website to deploy a working host. On the internet, there are many tutorials for the HA Tunnel program.

The IPsec VPN tunnel between the active and backup nodes protects HA VPN. The IPsec VPN connection is automatically built between the nodes once operational. Devices can only talk to each other using a local IP address unless they are secured with HA link encryption. IPsec is used to tunnel this communication. Using a manual VPN or IKE, you may observe how the IPsec SAs are negotiated between the active and backup nodes.

How to Setup Local Network on Ha Tunnel Plus? (Create Ha Tunnel File)

Now the tutorial starts at this point. We have only discussed these topics to get you ready to set up a working free internet configuration. Once again, every ISP network, including yours, can apply any of the techniques in this essay.

We will assess each Ha Tunnel method for unlimited access to the internet. Before we start cooking up the settings, you need a few things.

1. The Direct Connection method

The steps in this procedure are simple, so you don’t need to do anything special. Read on.

This technique can be helpful when your network’s server has an open port or you want to use a social media pack or similar subscription to access free internet on your device. But since this approach isn’t always successful, it comes in first.

  • Open your Ha Tunnel Plus app
  • Go to Connection Mode and enable Custom Setup
  • Click on the drop-down arrow icon and select Direct Connection (Internet)
  • Go right up, click Select Port, and then choose your port from the drop-down (The most common ports used in this case are 8080,443, 3128, and 80).
READ ALSO:  How To Remove Google Account From Samsung Tab 2?

The Direct Connection Method

  • Go to Select Server and select the server of your choice. If not, leave the default server that way.
  • Click on Start and wait for your connection to go through. You can check the Log section for your connection status

2. The Custom Payload or TCP Mode

TCP (Transmission Control Protocol) is used in this connection method to allow consumers free Internet access. It is implied that this uses the HTTP method.

When to apply

It can be applied to scams that promise unlimited access for free, e-learning bundles, social media packs, and other similar offerings.

  • Open your Ha Tunnel Plus app.
  • Go to Connection Mode and enable Custom Setup.
  • Click on the drop-down arrow icon and select Custom Payload (TCP Mode)
  • Locate the hamburger button at your screen’s top upper left corner and click on it.
  • Click on Payload Generator.

The Custom Payload Or Tcp Mode

  • After clicking on Generate, you will be taken to another page where you must confirm the details. Click on Apply to apply the settings Ha Tunnel Plus if it’s okay.
  • Click on Connect and then wait for the connection to go through. You can also check the log section for your connection status.

Description of Methods to Create a Network on Ha Tunnel Plus

  • Host: Here, you put in your free host/SNI. It could be the host of even the subscription you want to use and circumvent your ISP restriction for free Internet access. Here is a brief description of what some of these methods mean:
  • Method: This is your method of injection (HTTP requests) to trick your ISP. There is a drop-down for selecting the one that best suits you.
  • HTTP-Bug: Is your host an HTTP bug? Yes, most likely it is. It should be your preferred choice when creating configuration since it does the work of the GET. This method is specific and forces your connection through.
  • GET: This method should be the second thing you tick when the HTTP-Bug method fails. GET does the job, too, very well. The GET method pulls data from the webserver to which you are posting it.
  • CONNECT: Not popular, though; this method creates an HTTP tunnel via a proxy server. This method is mainly used for SSL connections but also works for HTTP.
  • HTTP Version: I won’t start explaining everything from scratch because we might divert from today’s topic. There are three versions of HTTP here:
  • HTTP/1.0: This guy is old and heading into retirement. There is no need to use it unless you are very sure of what you are doing.
  • HTTP/1.1: This guy is the most common version of HTTP today. To avoid issues, this should be your preferred destination.
  • HTTP/2: Unlike HTTP/1.1, this guy is better and faster. It comes with improved performance, reduced latency, etc., but hasn’t seen as wide adoption as the former.
  • HTTP HEADERS: This section enables the communication or transfer of data between a web server and a client with an HTTP request or response.
  • Keep Alive: This general-type header allows the sender to set the maximum amount of requests or how long a persistent connection should stay open. It would help if you had this option for your connection.
  • User-Agent: This request header is like a middle guy who retrieves, renders, and facilitates end-user interaction with the web content. Long story short, you need it for free Internet surfing.
  • Online host: let’s not complicate things. It is the web server, and you need it.
  • Forwarded For: This enables this app to obtain endpoint information.
  1. The Custom Host Header (HTTP Mode)

There is writing showing HTTP Mode, but nothing else is visible beside the name and a Custom Host/Payload. Just like they did with the TCP, the developers of this app need to have provided this person with a payload generator.

I will advise you to connect through an HTTP Proxy if the connection protocol must be HTTP and not TCP or SSL. If not, go for a stroll.

In the section marked “Select Port,” enter your Custom Host and choose the port it will use. Check the log section as well to see how your connection is doing.

3. Custom SNI (SSL/TLS Mode)

 

There is writing showing HTTP Mode, but other than the name and a Custom Host/Payload, nothing else is visible. Just like they did with the TCP, the developers of this app need to have provided this person with a payload generator.

I will advise you to connect through an HTTP Proxy if the connection protocol must be HTTP and not TCP or SSL. If not, go for a stroll.

READ ALSO:  Can You Reset Your Character In RuneScape? (Best Answer)

In the section marked “Select Port,” enter your Custom Host and choose the port it will use. Check the log section as well to see how your connection is doing.

4. Custom SNI (SSL/TLS Mode)

 

SNI, however, wasn’t widely used until lately. It should be good news for you that the method is still new to them and that your location might not even accept it (at the moment).

When to apply

Numerous stunts can be performed with this technique. It covers scams that provide unrestricted access for free without charging you, social networking packs, eLearning packages, free hosts, etc. For Telikom Papua New Guinea, I’ll use cdc.gov, and for MTN Ghana, I’ll use 45.33.4.164.

There is a stress-free approach to obtaining free SNI/hosts if you require SNI immediately.

  • Open your Ha Tunnel Plus app
  • Go to Connection Mode and enable Custom Setup.

Custom Sni (Ssl/Tls Mode)

 

  • Click on the drop-down arrow icon and select Custom SNI (SSL, TLS Mode)
  • You can now type in your SNI in the Custom SNI space provided, tick Use Realm Host (v2), and then Start.

Note: Recall that I said I would use the host mentioned above. Use your own instead of the ones I mentioned above. If you are using SNI and are having trouble connecting, try adding www. to your host or removing it if it was already there.

For instance, using www.cdc.org did not work when we tested it; therefore, we will try using cdc.org without the www. The same is true if you try to use cdc.org and run into a problem; add www. This small issue may prevent your connection from working.

How to export a Ha Tunnel Plus .hat file?

You must have completed your configuration and verified that it is working.

  • Click on the hamburger icon and then Export Config.
  • Add Description/Message: This is where you talk about the .hat configuration file.
  • Anti-Sniff: This prevents the Config from being sniffed
  • Mobile Data: When you tick this option, only those on the mobile network can use the configuration. It won’t work for WiFi users.
  • Block Root: This will block Android users on a rooted device
  • Password: When you enable this, users will need a password from you to use the configuration fileSet Expiry: This is used to step up an expiry date for the configuration to expire.
  • Now click on Export, and the configuration will be exported to your phone’s Ha Tunnel Plus folder.

How to import Ha Tunnel Plus .hat file?

  1. Click on the hamburger icon and then Import Config
  2. Now locate the Config you want to import and click on it.
  3. When it finally uploads, click on Start and wait for the connection to go through.

Other workaround

1. Creating a host

Creating your payload generator is the first step in creating a host for your HA Tunnel Plus VPN. Create an HTTP connection and a custom host, preferably on port 80, to achieve this. You must set up your configuration settings after creating a host. The steps are listed below. You can use your HA Tunnel Plus VPN after completing these procedures. The entire process is covered in this tutorial.

I will advise you to connect through an HTTP Proxy if the connection protocol must be HTTP and not TCP or SSL. If not, go for a stroll.

In the section marked “Select Port,” enter your Custom Host and choose the port it will use. Check the log section as well to see how your connection is doing.

For free internet connection, use the Ha Tunnel Plus app and enter the Custom Host, Custom Port, and Server Name Indication. Make sure your network-appropriate settings are in place. To save the changes, you must click “Apply” after entering the details. The progress will then be shown in your log. Your network connection should be active within minutes if everything goes according to plan.

The free internet is helpful when it comes to finishing online courses, watching streaming films, and downloading big files. Users without access to a free internet connection are the target audience for the following instructions. You can also download a free HAT file to construct a host for your HA Tunnel Plus application. You can download the application from the link below if unsure of what these stages entail. The HA Tunnel Plus application must be downloaded before creating a host.

Download the latest versions of your configuration files if you’re unsure if they work with your network. The ha tunnel plus configuration files can then be downloaded and used. You must be cautious when downloading the config file because some networks might not yet support ha tunnel plus. Always create a backup of the data before downloading them for your protection. Here you may find the most recent ha tunnel plus configuration files.

Importing your hat files into your Ha Tunnel Plus is the following procedure. You can use these hat files if your internet provider is unavailable in your country. There are ha tunnel plus config files for France, the UK, and Tanzania that are tailored for certain networks. The configuration files for Uganda and other nations can also be used. You can use the internet indefinitely when the files have been successfully loaded.

READ ALSO:  How To Delete Grindr Account? [Easy Step]

2. Creating a VPN tunnel pair

Once the main configuration is in place, your ASA must be configured to form a VPN tunnel pair. To perform this, click “Create new VPN topology” in the VPN topology box after it has opened. Select the network you wish to secure and give it a name in the Create new VPN topology window. To create a new topology, click “Save.” If the VPN tunnel pair was properly formed, you should notice response traffic coming from the ASA.

You can build VPN tunnel pairs using HA Tunnel Plus, each containing one or more gateways. When creating a VPN tunnel pair, it would be best if you matched the advertised route priorities on both ends. To achieve this, you can either skip the advertise-ranges flag or specify a unique advertised-ranges flag. The advertised-ranges flag can be used to advertise IP address ranges.

You must download the Ha Tunnel Plus app to set up a VPN tunnel pair. Both the play store and the official website have it for sale. You must create a password after downloading the program. After doing this, launch the application and import the configuration. You’ll need to wait for the connection to complete after it has been established.

After creating your username and password, you must create the pre-shared key and the VPN tunnel. The key must contain a mixture of upper- and lowercase letters, digits, and symbols and must be at least ten characters long. It would help if you used the same key you generated to set up the tunnel pair on the other side. You might want to copy your key if it’s a complicated one.

You must set up the interface on your HA VPN gateway and peer router while configuring the VPN tunnel pair. Then, for the HA VPN gateway, choose the IKE version. Choosing IKEv2 is a must if you wish to enable IPv6 traffic. The peer VPN gateway resource needs to have the VPN service enabled. The VPN setup wizard will then guide you through the process of setting up a VPN tunnel pair after that.

3. Configuring a VPN gateway

 

You must set up the VPN gateway after installing Ha Tunnel Plus. You must use the configuration file you obtain to establish a VPN connection and get around trackers and bandwidth caps. Even though it’s against the law to download configuration files, you can still follow the procedures using a video tutorial you can find online. An existing configuration file may also be imported. To be sure that your settings are right, carefully follow the instructions.

Before configuring a HA VPN gateway, you must first configure a new Cloud Router. You can use it with your VLAN attachments and Cloud VPN tunnels if you already have one. However, unless you’re using the Cloud Router for an existing VPN connection, handling BGP sessions is not advised. A peer VPN gateway that supports Border Gateway Protocol must also be configured (BGP).

The VPN gateway must then be configured using the interface settings. Go to the FGT’s Log & Report > Traffic Log >> Forward Traffic to do this. The VPN gateway can be turned off by clicking the “X” button if you encounter an error. Check the output traffic after restarting your Ha Tunnel Plus VPN gateway. You should now see responses from the Azure ASA. When you observe response traffic from Azure, you may be sure that the VPN gateway is set up properly.

The HA Tunnel Plus can be set up in SNI tunneling mode. In a few seconds, the VPN gateway connects. You’ll receive a connection failure notification if the connection breaks down. Then, choose another IP address and try again. The process repeats until you are satisfied with the VPN gateway configuration. However, you may always go to the manual if you have any questions to make sure your configuration is correct.

 

Conclusion

 

Following this, you must set up the firewalls at each remote site. You can configure the firewalls at each remote location to guarantee a stable connection. It will guarantee that your VPN gateway won’t fail. The HA VPN gateways can be configured using the REDUNDANCY TYPE option of the HA VPN API. REDUNDANCY TYPE indicates how many external IP interfaces your VPN gateway will have.

Leave a Comment

Your email address will not be published.